Your first coating!

The simple steps towards durable protection for your car!

5 November 2025 by

Loise Deraeve

Take the jump - Actually, it's not a jump, just a few simple steps. Once your car has been treated with a ceramic coating, you'll understand why everyone is so crazy about the detailer's favourite.

1 What does it do?

Makes washing and drying your car much easier thanks to the durable self-cleaning coating. It also deepens the finish of the paint.

2 Preparation of the car

Washing, polishing & degreasing.

3 Applying the coating

Start with 50x50cm, work consistently and, as with everything, practise makes perfect.

4 Wipe off

Use two different cloths to even out the coating and remove any residue.

5 Coating maintenance

Wash regularly, decontaminate every 6 months & top up with a quick detailer.

6 The right coating for you

Choice made simple.

01 | What does it do?

A brief overview of ceramic coatings.

A ceramic coating (or any so-called “infused” coating - when you strip away the marketing) forms a thick, protective layer that bonds to the clear coat. This physical layer offers several practical benefits:

Makes washing and drying your car much easier thanks to its water and dirt repellent properties.

Self-cleaning, as it were, because all kinds of dirt are less likely to stick to the surface.

Lasts much longer than wax or sealant thanks to its chemical resistance.

in Jouw eerste coating

02 | Preparation of the car

A thorough wash

Start with a standard, complete wash – WITHOUT quick detailing, of course. There should be no paint protection present, otherwise the coating will not be able to adhere.

Read all about the correct washing process here in our academy.

Polishing

Depending on the result you want, this can be a light 1-step or heavy 3-step polish.

1-step for a smooth surface - if your car is new or in very good condition, then this is all you need.

Several steps to create the perfect look AND smooth surface - most cars will need this - if you want long-lasting protection for your car, why wouldn't you want it to be in perfect condition first?

Degreasing

If you only polished lightly, you just need to degrease with Prep.

If you have polished several steps, an extra wash is recommended to remove all oils from the polishing paste, dust and other residue. Wash the car with warm water and shampoo before degreasing it with a degreaser.

Your workspace

Apply the coating at a stable temperature (15-25°C) and ensure there is NO DIRECT SUNLIGHT. The higher the temperature, the faster you will need to wipe it off.

Lighting

Well-lit workspaces with indirect lighting are best – lights directed at the ceiling reveal poorly finished areas better than lights directed at the paintwork. A handheld light for close inspection is always recommended.

After coating

Remember that when you coat the car outside, you should apply a layer of Cure or Ceramic Detailer 1 hour after coating..

03 | Applying the coating

Do not be overly cautious, work efficiently and spread evenly.

Applying the coating to the applicator

Before we begin, we would like to clarify that these tips are for GYEON Q² One EVO which is the most user-friendly coating, ideal for your first experience with coatings.

First, generously coat the applicator with product so that the coating penetrates the applicator.

Afterwards, pour enough to cover the coating on the surface of the applicator - also ensure that the bottle never touches the applicator.

It is usually better to use too much product than too little.

Your 50x50cm working area

Start with the hood of your car:

Imagine a 50 x 50 cm square on the paintwork.

Form a “Z” shape with your applicator within your 50 x 50 cm working area.

Fill in the Z in the opposite direction until you have an even distribution of product.

Ensure that you go beyond the edges of your 50 x 50 cm working area to ensure that no areas between different sections remain uncoated.

Apply smoothly

If you work too slowly, there is a risk that the coating will adhere unevenly to the paint, so work quickly during application.

As you become more familiar with the procedure, you will be able to do larger sections at once.

Pro tip: Any leftover One EVO coating can be used to coat rims or plastic – definitely give it a go!

04 | Wipe-off

To level the product and remove residue.

Waiting time

The time you have to complete One EVO is 10 seconds to 10 minutes (absolute maximum), even though it is not necessary to wait, it gives you the freedom to do larger sections in one go.

Initial wipe-off

Use a coating towel, such as the Q2M BaldWipe, for the initial wipe-off.

Rub over/around the edges of your work area to ensure you don't miss anything.

Second wipe-off

Use a more soft, long fibererd towel, such as the Q2M SoftWipe, to remove excess product and residue.

During this step too, pay attention to not skip any part.

Pro tip: Once you are finished, check with an inspection light for blurred spots that were not properly assessed during your second assessment.

05 | Coating maintenance

To keep your coating Om je coating in optimal condition.

Regular wash

Now that your car has been coated, this is a piece of cake. Wash your car according to the standard washing procedure and experience how easy it is to remove all dirt.

Avoid aggressive chemicals, as these can affect the initial hydrophobicity, even if the coating is still present.

Decontamination wash

Do this every 6 months to get rid of flash rust and tar spots. Yes, you could do this every week, but it is not really necessary as long as there are no signs of contamination.

You will notice a significant difference each time you do this, freeing the coating from stubborn contamination.

Top up/boost

Protect your protection. Products like Ceramic Detailer are perfect to easily add fresh shine after every wash. o

This layer will absorb most of the dirt, so that the coating underneath will last even longer.

06 | The right coating for you

Your first coating?

One EVO is as easy to apply as wax - and the most forgiving, 1-layer ceramic protection to start off with.

With its long curing time and simple application, this is the coating we recommend for gaining experience with coatings.

What volume do I need?

A little goes a long way; when used correctly, these are the guidelines.

30ml for small cars (like a VW Polo)
50ml for medium-sized cars (like a BMW 3-Serie)
100ml for multiple cars - Unless you have an extremely large car such as a limousine, 100 ml is excessive for a car.

The right accessories

Not everything is included in the box - for the various steps, you will need:

Paint degreaser
Cloths to degrease (1 or 2)
2 coating towels
2 wipe off towels
Inspection light (optional)