?unique=7897b2e)
?unique=7897b2e)
300 Super Heavy Cut
Menzerna Super Heavy Cut Compound 300 is the newest compound in the range and delivers 25% more corrective power than the FG400!
| CAPACITY | 250 ml, 1 L |
| TYPE | Polishing agent |
| EAN | 4260063012167 |
Documents (Safety Data Sheets)
MENZERNA 300 SUPER HEAVY CUT
What's so special about the 300 Super Heavy Cut?
Menzerna Super Heavy Cut Compound 300 is the newest compound in the range and delivers 25% more corrective power than the FG400!
The polishing paste is formulated with even more refined aluminum oxide abrasive grains to remove deep scratches and marks from even the most weathered paint. Like all Menzerna pastes, it is made with the most uniform abrasive grains to achieve continuous and stable correction.
In combination with a wool pad or another pad with high corrective power, the Menzerna 300 can handle anything!
Please keep in mind that greater correction will always create slightly more dust, but even in this regard, the 300 is far ahead of its competitors, making it very pleasant to use.
- Maximum correction
- Fast Cut
- Limited dust
- Free from silicone and fillers
MANUAL
How do you use the 300 Super Heavy Cut?
Due to its high abrasiveness, you will achieve the best results with a Hard Foam Cutting Pad, a Lambswool pad, or a Microfiber Cutting Pad.
- Application: Apply 3 to 4 drops to the pad. When using a new wool pad, it is recommended to "prime" (saturate) the pad lightly first.
- Distribution: Spread the product over an area of approximately 40x40 cm at the lowest speed.
- Correction: Increase the speed (setting 4-5 on a DA, or an appropriate speed on a rotary). Work with light to medium pressure. Move the machine slowly and steadily; let the abrasive grains do the heavy lifting.
- Inspection: Stop as soon as the compound becomes transparent. Wipe off the residue immediately with a clean microfiber cloth. Use an inspection spray to check if the defects have been completely removed.
Important: After using the 300, the paint may often look a bit "dull" or you might see a slight haze. This is normal for a super heavy compound. Always follow this step with a medium polish (such as the 2500) and a finish polish (such as the 3500) for an optimal result.
Related products ↴
A team you can trust
We're all about reliability, craftsmanship, and transparency. Our team consists of dedicated professionals with years of experience and a passion for their work.
Call us on +32 55 86 00 09 or send an e-mail to info@wax-it.eu
From €50 in the BeNeLux + competitive shipping rates across Europe.
With our returns portal this can be done easily within 14 days.
