?unique=f08ced3)
Foam Cannon Pro V3.0 with connector
| CONNECTOR | Kranzle Quick Release Connector D12, Karcher K-series, Kranzle Quick Release Connector D10, M22 Connector, Lavor Connector, Bosch Short Reach Connector, Bosch Long Reach Connector, Nilfisk/KEW/Alto Connector, Nilfisk Pro Connector, Karcher HDS Connector, 1/4" Quick Connector Adapter, AVA of Norway Connector |
| TYPE ACCESSORY | Foam cannon |
| VOLUME | 1200 ml |
| WEIGHT | 0.7 kg |
| WORK PRESSURE | 50 - 340 bar |
| INSTALLED SPRAY NOZZLE | 1.35 mm |
| REPLACEMENT NOZZLE | 1.1 mm |
| EAN | Not available |
MJJC FOAM CANNON PRO V2.0
What's so special about the Foam Cannon Pro V2.0?
The MJJC Foam Cannon Pro V3.0 sets the new standard for touchless vehicle pre-washing. Where traditional foam lances often produce a watery foam that quickly runs off the car, the Pro V3.0 delivers a dense, "shaving cream" layer of foam. This foam clings to the paintwork for an exceptionally long time, giving the active ingredients of your snow foam the time to effectively encapsulate and loosen dirt, grit, and grime.
The Pro V3.0 is packed with smart, patented technologies. The unique 360 Degree Spray Pattern ensures that you can spray not only vertically and horizontally but at any angle you desire—ideal for comfortably reaching wheel arches and roofs. The improved, wide 1-liter bottle features a stable base, so the foam cannon won't tip over easily. Furthermore, the bottle is equipped with a robust, leak-resistant cap and a flexible weighted suction hose, allowing it to continue foaming until the very last drop of shampoo, even if you hold the lance upside down. The Pro V3.0 comes with an additional 1.1mm orifice (nozzle) for lighter pressure washers, ensuring you achieve maximum results even with lower water flow.
MANUAL
How do you use the Foam Cannon Pro V2.0?
1. Choosing the right nozzle: Adjust the orifice if necessary.
Check the specifications of your pressure washer. Are you using a powerful machine? Leave the pre-installed 1.25mm orifice in place. Are you using a compact machine (less than 110 bar or low water flow)? Use a screwdriver to unscrew the internal orifice and replace it with the included 1.1mm version for optimal foam.
2. Filling the bottle: Maintain the correct ratio.
Fill the sturdy 1-liter bottle with warm water and add your favorite snow foam according to the shampoo manufacturer's instructions (usually a ratio of 1:9 to 1:4). Screw the bottle securely onto the foam head and gently shake the bottle back and forth to thoroughly mix the water and shampoo.
3. Mounting and setting up: Secure the lance.
Connect the MJJC Foam Cannon Pro V3.0 to your pressure washer's spray gun using the specific connector (such as a bayonet or Quick Connect). Adjust the top red dial to set the foam thickness (+ for thicker foam, - for more water). Turn the front nozzle to set the desired spray pattern and angle (horizontal/vertical).
4. Foaming the vehicle: Work from bottom to top.
Point the foam cannon at the car and squeeze the trigger. Spray the car evenly, starting at the bottom and working your way up. This allows the foam to cling longer to the dirtiest parts of the vehicle. Let the foam dwell for a few minutes, but do not allow it to dry on the paintwork.
5. Thorough rinsing and maintenance: Flush the internal filters.
Rinse the car thoroughly with the standard lance of your pressure washer (again, from bottom to top). Important maintenance: Flush the foam cannon after use. Unscrew the bottle with shampoo, rinse the bottle, and fill it with plain water. Screw the bottle back onto the foam head and spray clean water through the system for 15-30 seconds. This prevents shampoo residue from clogging the internal stainless steel filter.
Related products ↴
A team you can trust
We're all about reliability, craftsmanship, and transparency. Our team consists of dedicated professionals with years of experience and a passion for their work.
Call us on +32 55 86 00 09 or send an e-mail to info@wax-it.eu
From €50 in the BeNeLux + competitive shipping rates across Europe.
With our returns portal this can be done easily within 14 days.
