Set Koolstofborstels Maxshine M8S, DAP500, DAP900
Compatible with:
- Maxshine M8S
- DAP500 (all models)
- DAP900 (v1 & v2)
These are not compatible with other Maxshine devices and the DAP900 V3.
| TYPE | Polishing machine accessories |
| TYPE ACCESSORY | Carbon brushes |
| EAN | Not available |
MAXSHINE SET CARBON BRUSHES (M8S, DAP500, DAP900)
What is so special about the Carbon Brush Set?
This set of replacement carbon brushes is an essential maintenance part for the most popular Dual Action polishers, including the MaxShine M8S and the well-known DAP500/DAP900 series. Carbon brushes are wear parts that transfer electrical current to the rotating motor (the armature). Over time, these brushes wear out due to friction. This set ensures that your machine runs at full power again, does not hesitate, and does not draw excessive sparks, significantly extending the lifespan of your polisher.
MANUAL
How to use the Carbon Brush Set
Replace the brushes when the machine runs irregularly, loses power, or when you hear the motor "stutter".
- Safety: Always unplug the device before you begin.
- Access: Unscrew the cover caps on the side of the machine housing with a suitable screwdriver.
- Replacement: Carefully remove the old, worn carbon brushes from the holders (note the spring) and install the new set. Ensure that the brush can move freely in the shaft and that the copper connector makes good contact.
- Break-in: Tighten the caps again and let the machine run unloaded on a low setting for approximately 2 to 3 minutes after replacement. This allows the new brushes to perfectly conform to the armature for optimal current conduction.
Related products ↴
A team you can trust
We're all about reliability, craftsmanship, and transparency. Our team consists of dedicated professionals with years of experience and a passion for their work.
Call us on +32 55 86 00 09 or send an e-mail to info@wax-it.eu
From €50 in the BeNeLux + competitive shipping rates across Europe.
With our returns portal this can be done easily within 14 days.
