?unique=214c403)
Roller Hard Cut
ADBL Hard Cut is a high-cut polishing compound for heavy-duty correction work. It removes deep scratches and even smooths out sanding marks from P1000 to P1500 grit. The formula is water-based and contains no silicones, fillers, or wax, so what you see is the actual result.
ADBL ROLLER HARD CUT
What is so special about the Roller Hard Cut?
When correcting paintwork, the first question is always how much material you need to remove. For light swirls, a fine polish is sufficient, but if there are deep scratches in your paint or if you’ve had to sand certain areas, you’ll need cutting power: the ability of a polish to remove a thin layer of clear coat until the scratch is gone. ADBL Hard Cut is firmly on that end of the spectrum and can even tackle sanding marks left by P1000 to P1500 sandpaper.
What makes this paste special is its composition. It’s water-based and contains no silicones, fillers, or wax. That’s important, because fillers only temporarily mask scratches instead of removing them, so you don’t realize the job wasn’t finished until after the first wash. With this product, you see the real results right away. Furthermore, the abrasive is ground ten times finer than in traditional polishes, and the polish produces very little dust. As you work, it becomes transparent, allowing you to track your progress.
It’s highly versatile: it works on both factory-applied and repainted paint, with a rotary or dual-action polisher, and with wool, foam, or microfiber pads. On harder paint finishes, you can even finish the job in a single step with the right pad.
MANUAL
How do you use the Roller Hard Cut?
- Thoroughly wash and degrease the paint surface and decontaminate it to ensure that no particles end up under your pad.
- Work indoors or in the shade—never in direct sunlight—and shake the bottle well before use.
- Apply up to four drops of paste to a clean, unused pad.
- First, spread the dough over an area measuring about 40 by 40 cm while the machine is set to the lowest setting and without applying any pressure.
- Then increase the speed to setting 3 or 4 and work your way across the surface systematically in overlapping passes.
- Keep polishing until the paste becomes clear; that's the sign that the abrasive has done its job.
- Wipe away any residue with a clean microfiber cloth, check the results under a bright light, and, if necessary, touch up with a finer paste for the final finish.
Related products ↴
De details
| CAPACITY | 200 ml, 1 L |
| TYPE | Polishing agent |
| TYPE OF POLISHING MACHINE | DA + Rotary |
Maak het compleet
A team you can trust
We're all about reliability, craftsmanship, and transparency. Our team consists of dedicated professionals with years of experience and a passion for their work.
Call us on +32 55 86 00 09 or send an e-mail to info@wax-it.eu
From €50 in the BeNeLux + competitive shipping rates across Europe.
With our returns portal this can be done easily within 14 days.
