?unique=214c403)
Cut Pro
ADBL CUT PRO
What is so special about the Cut Pro?
When an ordinary polishing compound is not enough, ADBL's Cut Pro brings out the heavy artillery. This professional compound is developed for severe paint correction: deep scratches, heavy oxidation, and stubborn paint defects on harder paint structures. It is even powerful enough to remove sanding marks from P1000 sandpaper, making it suitable for work after repair or repainting.
The formula is water-based and contains no polymers. That is a deliberate choice: without filling polymers, you immediately see the true result of your correction instead of a temporarily masked surface. In practice, that base also yields three pleasant properties: low dust formation during polishing, a long working time so you don't have to rush the compound, and residues that wipe off easily.
You work the Cut Pro with a rotary or dual-action machine, in combination with a wool, microfiber, or foam pad depending on the desired aggressiveness. Economical dosing is the key: a few drops per section are sufficient. After correction, degrease the paint so you can purely assess the result before proceeding with a finishing polish and protection.
MANUAL
How do you use Cut Pro?
- Wash the car thoroughly and ensure the paint is completely clean and cool. Never work in direct sunlight.
- Shake the bottle well before use.
- Choose your pad according to the job: wool or microfiber for maximum cutting power, foam for a slightly milder correction. Use a clean, non-saturated pad.
- Dose sparingly: a maximum of about 4 drops per 40 x 40 cm section. Spread the compound calmly over the area before ramping up the speed.
- Finish the section with crisscross movements and even pressure, making use of the long working time to fully complete the correction.
- Wipe away the residues with a clean microfiber cloth and then degrease the paint so you can assess the true result.
- Follow up with a finer finishing polish if necessary, and always apply protection afterward (wax, sealant, or coating).
ADBL CUT PRO
Watch our explainer video.
Related products ↴
De details
| CAPACITY | 200 ml, 1 L |
| USAGE | Polishing |
| TYPE | Heavy-cut compound |
| CUTTING POWER | High |
| COMPOSITION | Water-based, without polymers |
| TYPE OF POLISHING MACHINE | DA + Rotary |
Maak het compleet
A team you can trust
We're all about reliability, craftsmanship, and transparency. Our team consists of dedicated professionals with years of experience and a passion for their work.
Call us on +32 55 86 00 09 or send an e-mail to info@wax-it.eu
From €50 in the BeNeLux + competitive shipping rates across Europe.
With our returns portal this can be done easily within 14 days.
