?unique=ceaf326)
Foam Cannon Pro V3.0 with connector
| CONNECTOR | Kranzle Quick Release Connector D12, Karcher K-series, Kranzle Quick Release Connector D10, M22 Connector, Lavor Connector, Bosch Short Reach Connector, Bosch Long Reach Connector, Nilfisk/KEW/Alto Connector, Nilfisk Pro Connector, Karcher HDS Connector, 1/4" Quick Connector Adapter, AVA of Norway Connector |
| TYPE ACCESSORY | Foam cannon |
| VOLUME | 1200 ml |
| WEIGHT | 0.7 kg |
| WORK PRESSURE | 50 - 340 bar |
| INSTALLED SPRAY NOZZLE | 1.35 mm |
| REPLACEMENT NOZZLE | 1.1 mm |
| EAN | Not available |
MJJC FOAM CANNON PRO V2.0
What's so special about the Foam Cannon Pro V2.0?
The MJJC Foam Cannon Pro V3.0 sets the new standard for contactless vehicle pre-washing. Where traditional foam lances often produce a watery foam that quickly runs off the car, the Pro V3.0 delivers a dense 'shaving cream' foam blanket. This foam adheres to the paintwork for an extremely long time, giving the active ingredients of your snow foam time to effectively encapsulate and loosen dirt, sand, and grime.
The Pro V3.0 is packed with smart, patented technologies. The unique 360-Degree Spray Pattern ensures that you can spray not only vertically and horizontally, but at any desired angle – ideal for comfortably cleaning wheel arches and roofs. The improved, wide 1-liter bottle features a stable base so the foam cannon won't tip over easily. Furthermore, the bottle is equipped with a robust, leak-proof cap and a flexible, weighted suction hose, ensuring it continues to lather down to the very last drop of shampoo, even when the lance is held upside down. The Pro V3.0 comes with an extra 1.1mm orifice for lighter pressure washers, allowing you to achieve maximum results even with a lower water output.
MANUAL
How do you use the Foam Cannon Pro V2.0?
1. Choosing the right nozzle: Adjust the orifice if necessary.
Check the specifications of your pressure washer. Are you using a powerful machine? Leave the standard 1.25mm orifice in place. Are you using a compact machine (less than 110 bar or low water output)? Then use a screwdriver to loosen the internal orifice and replace it with the supplied 1.1mm variant for optimal foam.
2. Filling the bottle: Maintain the correct ratio.
Fill the sturdy 1-liter bottle with warm water and add your favorite snow foam according to the shampoo manufacturer's instructions (usually a ratio of 1:9 to 1:4). Screw the bottle tightly onto the foam head and shake the bottle gently back and forth to mix the water and shampoo well.
3. Mounting and setting: Click the lance into place.
Connect the MJJC Foam Cannon Pro V3.0 to your pressure washer's spray gun using the specific connection (such as a bayonet or Quick Connect). Adjust the top red dial to determine the foam thickness (+ for thicker foam, - for more water). Turn the front nozzle to set the desired spray pattern and angle (horizontal/vertical).
4. Foam the vehicle: Work from bottom to top.
Aim the foam cannon at the car and squeeze the handle. Spray the car evenly, starting at the bottom and working your way up. This allows the foam to cling longer to the dirtiest parts of the car. Let the foam sit for a few minutes, but absolutely do not let it dry on the paintwork.
5. Thorough rinsing and maintenance: Rinse the internal filters clean.
Rinse the car thoroughly with the standard lance of your pressure washer (again, from bottom to top). Important maintenance: Rinse the foam cannon after use. Unscrew the shampoo bottle, rinse the bottle, and fill it with pure water. Screw the bottle back under the foam head and spray clean water through the system for 15-30 seconds. This prevents shampoo residue from clogging the internal stainless steel filter.
Related products ↴
A team you can trust
We're all about reliability, craftsmanship, and transparency. Our team consists of dedicated professionals with years of experience and a passion for their work.
Call us on +32 55 86 00 09 or send an e-mail to info@wax-it.eu
From €50 in the BeNeLux + competitive shipping rates across Europe.
With our returns portal this can be done easily within 14 days.
